EMG Presses Việt Nam

Các dòng sản phẩm của hãng EMG Presses:

Máy ép thủy lực (Hydraulic Presses):
- Sử dụng áp lực thủy lực để thực hiện các quy trình tạo hình, cắt, dập.
- Ứng dụng: sản xuất kim loại, nhựa, và các vật liệu tổng hợp.
Máy ép cơ khí (Mechanical Presses):
- Dùng động cơ cơ khí để cung cấp lực ép, tốc độ cao và độ chính xác cao.
- Phù hợp cho các ứng dụng dập liên tục, tạo hình trong ngành ô tô, điện tử.
Máy ép servo (Servo Presses):
- Sử dụng động cơ servo để điều chỉnh lực ép và tốc độ linh hoạt.
- Ưu điểm: tiết kiệm năng lượng, độ chính xác cao, kiểm soát quy trình chi tiết.
Máy ép đa năng (Universal Presses):
- Thiết kế linh hoạt, đa chức năng, phù hợp cho nhiều ứng dụng khác nhau.
- Dùng trong sản xuất phụ tùng, các sản phẩm nhỏ và trung bình.
Máy ép tùy chỉnh (Custom Presses):
- Được thiết kế theo yêu cầu đặc thù của khách hàng.
- Ứng dụng: sản xuất sản phẩm phức tạp hoặc đòi hỏi quy trình đặc biệt.
Phụ kiện và hệ thống hỗ trợ:
- Bao gồm khuôn dập, hệ thống điều khiển tự động, bộ nạp liệu, và thiết bị an toàn.

Ứng dụng chính:

Công nghiệp ô tô: sản xuất linh kiện, khung xe.
Ngành điện tử: dập vỏ, tạo hình bảng mạch.
Ngành xây dựng: tạo hình các cấu kiện kim loại.
Sản xuất nhựa và vật liệu tổng hợp: ép định hình, dập chi tiết.

Standard presses

Rack and pinion manual bench presses 440 lbs to 11,000lbs

Manual rack presses

These manual presses are robust, precise, flexible and ergonomic. They have adjustable headroom and stroke. They are quick and easy to use. They are economical, requiring little investment.

The EMG range of manual rack and pinion presses comprises two different types of press:

* Rack and pinion manual presses whose power, from 440 to 1,320 lbs, is linear and constant over the entire stroke depending on the force exerted on the machine lever. They can be used for assembly operations, bearing and ring assembly, crimping, small bending operations, etc.

* High-capacity rack-and-pinion manual presses complete the range of rack-and-pinion presses, with power ratings from 3,000 lbs to 11,000 lbs. These models are ideally suited to applications such as assembly, fitting and deep pressing, as well as all applications requiring significant travel and/or headroom.

Manual rack presses

Manual bench toggle presses 1,100 lbs to 4,400 lbs

Manual toggle presses

Manual toggle presses where the maximum power, from 1,100 to 4,400 lbs, is obtained only at the end of the stroke, depending on the force exerted on the lever.

The EMG range of manual toggle presses comprises two different types of press:

* Manual toggle presses with a power range from 1,100 to 4,400 lbs. They are frequently used for assembly operations, cutting fine products, small bending operations, various crimping operations, etc.

* High-capacity manualtoggle presses to complement the range of toggle presses, with power ratings from 1,540 lbs to 4,400 lbs. With their adjustable height and significantly larger tables, these models are ideal for applications such as assembly, cutting thin products, small bends, various crimping operations and all applications requiring a large stroke and/or headroom.

Manual toggle presses

Pneumatic bench presses 800 lbs to 13,000 lbs

Pneumatic bench presses

Offering the same design features and intended for the same uses, the range of pneumatic EMG presses completes the range of manual presses by perfectly meeting the user’s requirements when the output is higher and/or the power to be delivered is greater.

All cylinders are EMG manufactured and have proven themselves in thousands of applications worldwide.

The slide is made of chrome steel, guided on bushings and secured against rotation by a key. The piston slides smoothly in the chrome-plated cylinder. Seals ensure a perfect seal of the cylinder.

The power of our presses is indicated with a pressure at 87 psi and is proportionally adjustable as standard from 44 to 87 psi.

Example: the 6PHR press delivers 800 lbs at 87 psi, and therefore 400 lbs at 44 psi, 530 lbs at 58 psi and 660 lbs at 72 psi.

The EMG range of pneumatic presses can be integrated into the workstation or the production line, providing ergonomics, operator safety and process reliability.

Pneumatic bench presses

Marking presses 1,300 to 13,000 lbs

Impactor marking presses

At a time of ISO standardisation, part identification and traceability, EMG marking presses from 1,300 to 13,000 lbs offer a range of presses and accessories for marking, numbering, riveting and crimping that combine performance, precision and safety.

This range can be found in many workshops. The power delivered is constant and regular, and remains precise whatever the force applied to the lever. These presses feature adjustable striking power and a device that prevents double-striking.

Impactor marking presses

Hydropneumatic presses 7T to 110T

Hydropneumatic presses

Articulated hydropneumatic presses from 10 different standard frames and 60 cylinders allow an unlimited number of combinations.

At EMG, we work with compressed air only: Our cylinder is a compressed air cylinder with closed hydraulic circuits, which means it can achieve the required forces with a working stroke that is triggered when the piston meets resistance.

Actuation is very simple and similar to double-acting pneumatic cylinders. This technology combines the advantages of pneumatic and hydraulic systems, without the disadvantages (no noisy, dirty hydraulic units, low air consumption, etc.).

The operating principle of EMG hydropneumatic cylinders is to divide the total stroke into 3 parts: the fast approach stroke, the working stroke and the return stroke.

Hydropneumatic presses

Mechanical eccentric presses 6,6T to 88T

Mechanical eccentric presses

Power from 6,6 T to 88 T Stroke from 0.15 to 5.7 inch EMG mechanical eccentric presses are performance oriented in watchmaking, jewwellery, mechanical optics, electrical and electronic machines, automotive industry, electrical goods, toys, locksmithing. These presses are guaranted with optimum quality and unparalleled productivity.

Mechanical eccentric presses

EMGpresses Products I EMG Products

Our extensive, top quality product range of press and machine tool components, carefully chosen to meet all your engineering needs and developed over our many years of specialising in standard parts for machine equipment. Always our best prices, coupled with fast, reliable delivery, making us your key single source supplier.

Mechanic Machines

Standard Machine Elements

Knobs & Handles

Cabinet, U & Tubular Handles, Gripping Trays

Handwheels & Cranked Handles

Position Indicators, Indexing Mechanisms & Control Knobs

Adjustable Hand Levers, Clamping Levers & Tension Levers

Hand Knobs, Star Knobs, Wing & Knurled Thumb Screws & Nuts

Eccentrical Cams, Clamping Bolts, Clamping Units

Toggle Clamps, Power & Hook Clamps

Indexing Plungers, Locking pins & Spring Plungers

Screws, Nuts, Washers Clamping & Supporting Elements

Hinges, Latches and Locks for Doors, Cupboards, Drawers, Hatches and Covers

Levelling Feet, Lifting Gear and Rubber Elements

Oil Level Sight Glasses, Level Indicators & Plugs

Universal, Ball Joints & Fork Joints

Tube Clamp Connectors, Clamp mountings & Connecting Elements

Guides, Spindles, Ball Rollers, Slide Units, Guide Rails & Linear Actuators

Magnets – Retaining Magnets

Wheels and Castors

Operating Instructions and Technical Information

Special Applications

All Hygienic Design Products

Vishnus Value Vault

Die Sets & Press Tool Standard Parts

Die Sets

Guide Pillars (Pins), Bushes & Cages, ISO, IEM standards

Shoulder Bolts, Screws & Nuts

Lifting Components

Dowel Pins & Extractable Dowel Pins

Die Springs

Nitrogen Gas Springs

Urelast & Rubber Products

Punches & Dies

Drill Bushes

Mechanical Cam Units

Presses

Bending Units

Transfer Units

Mould Bases & Components

Standard Mould Bases

EUR-X-Z Standard Mould Bases

Mould Pillars & Bushes

Ejector Pins & Sleeves

Mould Assembly Components

Urelast & Rubber Products

Springs & Shoulder Bolts

Wear Plates – Sliding System

Mould Guided Ejection Sets

Mould Locating Units & Locks

European Standard Mould Bases E-Series

EMGpresses Special Executions

Line of mechanical presses – unwinders – straighteners – fitters

Complete production lines

EMG PRESSE creates full and customized manufacturing lines bands or for threads.

Production equipment components are selected from our partners by our design department to ensure that your specifications and your requirements regarding profitability and quality are respected. They are compliant with all the strictest regulations.

Complete production lines

Customised stainless steel manual presses – force management – non-return valve

Manual press equipment

EMG is a manufacturer of presses meeting the needs of Industrial companies and craftsmen. We design and manufacture presses adapted to the specific markets or environments of our customers such as, for example, for the food industry, pharmaceutical, chemical and electronics sectors.

Manual press equipment

Mechanical press equipment – safety – ergonomics – productivity

Mechanical press equipment

EMG PRESSES supplies its industrial presses with safety, ergonomic and technical accessories.

Mechanical press equipment

Customised industrial presses and tooling

Special executions for presses

At a time when 4.0 industry is taking off, manageable-sized SME’s are seeking the best way to mechanize repetitive tasks performed by their collaborators. If the goal of improving a manufacturing process has long been making gains in productivity, today, this goal is no longer enough. A “new” priority has arisen. This involves the operator and, more specifically, reducing the difficulty of the work.

Throughout the manufacturing chain, machines can be adapted to their operators so that they are more ergonomic, and therefore limit the risks of musculo-skeletal problems. At EMG, we work with you to analyze the problems you are encountering and adapt our presses to provide your workers with greater comfort.

Special executions for presses

Force and displacement management – force and displacement sensors

Force and/or displacement Monitoring

EMG offers all types of force/ displacement monitoring thanks to force and displacement sensor solutions adapted to each need, for 100% parts control.

Force and/or displacement Monitoring

Products

Standard Machine Elements

Knobs_and_Handles.jpg

Knobs & HandlesCabinet__U___Tubular_Handles__Gripping_Trays.jpg

Cabinet, U & Tubular Handles, Gripping TraysHandwheelsNewCatIMG.jpg

Handwheels & Cranked HandlesIndexing_mechansims__Control_Units____Slide_UnitsNewCatIMG.jpg

Position Indicators, Indexing Mechanisms & Control KnobsAdjustable_Handlevers__Ratchets.jpg

Adjustable Hand Levers, Clamping Levers & Tension LeversHand_Knobs__Star_Knobs__Wing___Knurled_Thumb_ScrewsNewCatIMG.jpg

Hand Knobs, Star Knobs, Wing & Knurled Thumb Screws & NutsEccentrical_Cams__Clamping_Bolts__Clamping_UnitsNewCatIMG.jpg

Eccentrical Cams, Clamping Bolts, Clamping UnitsToggle_Clamps__Power___Hook_ClampsNewCatIMG.jpg

Toggle Clamps, Power & Hook ClampsIndexing_Plungers__Locking_pins___Spring_PlungersNewCatIMG.jpg

Indexing Plungers, Locking pins & Spring Plungers3.2-Mounting-positioning-levelling-with-screws-clamping-and-supporting-elements.jpg

Screws, Nuts, Washers Clamping & Supporting ElementsCatagory-Image-Swinging-latching-locking-of-doors-and-covers.jpg

Hinges, Latches and Locks for Doors, Cupboards, Drawers, Hatches and CoversLevelling_Feet__Latches___HingesNewCatIMG.jpg

Levelling Feet, Lifting Gear and Rubber ElementsOil_Level_Sight_Glasses__Level_Indicators___PlugsNewCatIMG.jpg

Oil Level Sight Glasses, Level Indicators & PlugsUniversal__Ball_Joints___Fork_jointsNewCatIMG.jpg

Universal, Ball Joints & Fork JointsTube_Clamp_Connectors__Clamp_mountings___Linear_Actuators_NewCatIMG.jpg

Tube Clamp Connectors, Clamp mountings & Connecting ElementsGuides_Spindles_Ball_Rollers_Category_Image.png

Guides, Spindles, Ball Rollers, Slide Units, Guide Rails & Linear ActuatorsRetaining_magnetsNewCatIMG.jpg

Magnets – Retaining MagnetsAwaiting Image

Wheels and CastorsOperating_Instruction_Category_IMG.jpg

Operating Instructions and Technical InformationSpecial_Applications_Category_Image.jpg

Special Applicationscsm_hygienic_design.jpg

All Hygienic Design ProductsVishnu_Vault-category.png

Vishnus Value Vault

Die Sets & Press Tool Standard Parts

DIE_SET4.png

Die Setsguide_pillars_bushes_and_cages_standards.jpg

Guide Pillars (Pins), Bushes & Cages, ISO, IEM standardsShoulder_Bolts_Screws.png

Shoulder Bolts, Screws & NutsLifting_Components.png

Lifting ComponentsDowel_Pins___Extractable_Dowel_Pins.jpg

Dowel Pins & Extractable Dowel PinsDie_springs_cat_picture.jpg

Die Springsnitrogen_gas_springs_cat_IMG.jpg

Nitrogen Gas SpringsUrelast_2nd_Cat_IMG.jpg

Urelast & Rubber ProductsPunch_and_Die_category_image.png

Punches & Diescategory_import_32.jpg

Drill Bushescam_units.jpg

Mechanical Cam UnitsPresses_2.jpg

Pressesbending_units_image.jpg

Bending UnitsTransfer_Unit_Category_image_218x218.jpg

Transfer Units

Mould Bases & Components

european_mould_bases_cat_pic.jpg

Standard Mould Basescategory_import_58.jpg

EUR-X-Z Standard Mould BasesMould_Pillars_and_Bushes_catagory_image.jpg

Mould Pillars & BushesEjector_pins_and_sleeves_cat_IMG_full.jpg

Ejector Pins & SleevesMould_Assembly_Components_Cat_IMG.jpg

Mould Assembly ComponentsUrelast_2nd_Cat_IMG.jpg

Urelast & Rubber ProductsSprings_and_shoulder_bolts.jpg

Springs & Shoulder BoltsWear_plates_-_Sliding_system.jpg

Wear Plates – Sliding SystemMould_guided_ejection_sets_series_image.jpg

Mould Guided Ejection SetsMould_locating_unit-locks.jpg

Mould Locating Units & Lockseuropean_mould_bases_cat_pic.jpg

European Standard Mould Bases E-Series

valve-control-expert

website: https://valve-control-expert.com/

Xem thêm các sản phẩm tự động hóa

Xem thêm các thương hiệu tự động hóa

HOTLINE: 0348097237

brands

EMG Presses Việt Nam

EMG Presses Việt Nam